Logic+ Heat
Heat Only
The Logic+ Heat range of boilers from Ideal provides an easy to install, dependable heat only solution for both new build or replacement installations alike, fully supported by a 5 year parts and labour warranty *.
The Logic+ Heat delivers total home comfort for a wide variety of domestic properties. It is highly efficient and easy to operate thanks to simple controls featuring a clear digital display.
With a compact cupboard fit, the Logic+ Heat boiler can be conveniently installed into a standard kitchen cupboard. (Please check kitchen cupboard size prior to installation.)
Our boilers are manufactured at the Ideal factory in Hull, East Yorkshire. Ideal has been manufacturing here for over 100 years.
The Logic Plus Heat comes with a 5 year warranty, giving both you and your customer peace of mind. To be eligible for the 5 year warranty your boiler must be registered within 30 days and serviced regularly.
This boiler is designed to fit into a standard kitchen cupboard.
Clear digital display for plain and simple logistics.
Frost protection, so your boiler will run in harsh weather.
A range of flue options to suit your home.
Direct rear flue option to speed up installation in retro-fit situations.
Low NOx levels means low emissions.
Sedbuk A rated - a minimum of 91% seasonal efficiency, which means lower emissions and lower gas bills.
Spec Sheet & User Guide
Features & Benefits at a glance
- SEDBUK A rated (91%+)
- 5 year parts and labour warranty *
- Compact cupboard fit
- Direct 80mm diameter rear flue option
- Wide range of flueing options
- Low lift weight
- Top system connections
- 75mm deep translucent condensate siphon
- Stand off kit
- Terminal wall plate kit
- Security bracket kit
- Fully modulating operation down to 4.8kW
- Weather compensation kit option
- Boiler frost protection
- Low minimum head requirement
- Water flow sensor
- Size & Performance
- Construction & Installation
- Clearances & User Interface
- Pipes & Flues
| 12 | 15 | 18 | 24 | 30 | |
|---|---|---|---|---|---|
| Casing dimensions (h w d) mm | |||||
| Height | 700 | ||||
| Width | 395 | ||||
| Depth | 278 | ||||
| Weight (packed kg) | 28.7 | ||||
| Maximum Installation Weight (kg) | 23.0 | ||||
| CH output (kW) Min/Max @ 70C | 4.8 - 12.0 | 4.8 - 15.0 | 4.8 - 18.0 | 4.8 - 24.2 | 6.1 - 30.3 |
| CH output (kW) Min/Max @ 40C | 5.1 - 13.0 | 5.1 - 15.9 | 5.1 - 19.1 | 5.1 - 25.6 | 6.4 - 31.0 |
| DHW output (kW) Max | N/A | ||||
| DHW flow rate l/min. 35°C rise | N/A | ||||
| SEDBUK rating | Band A | ||||
| SEDBUK % | 91.2% | 91.1% | 91.0% | 91.0% | 91.0% |
| NOx Classification | CLASS 5 | ||||
| Adjustable to LPG | No | ||||
| 12 | 15 | 18 | 24 | 30 | |
|---|---|---|---|---|---|
| Heat exchanger material | Cast Aluminium - Silicon Alloy | ||||
| Burner type | Downward firing Pre-mix | ||||
| Fully modulating | Yes | ||||
| DHW plate heat exchanger | N/A | ||||
| Integrated hydroblock | N/A | ||||
| Suitable for sealed systems | Yes | ||||
| Suitable for open-vent systems | Yes | ||||
| Filling loop | No | ||||
| Pre-wired mains lead | No | ||||
| Flow regulator | N/A | ||||
| Inbuilt system bypass | No | ||||
| Inbuilt condensate trap/siphon | Yes | ||||
| Inbuilt boiler frost protection | Yes | ||||
| Zero compartment ventilation | Yes | ||||
| 12 | 15 | 18 | 24 | 30 | |
|---|---|---|---|---|---|
| Top (mm) (from top of boiler) | 165 (100 rear outlet flue) | ||||
| Side (mm) | 2.5 | ||||
| Bottom (mm) | 100 | ||||
| Front (mm) | 450 | ||||
| User display | Digital (Alpha/numeric) | ||||
| User interface | Digital display & manual controls | ||||
| Diagnostics | Fault diagnosis display | ||||
| User adjustable | Manual heating control | ||||
| ‘Eco’ setting on CH | Yes | ||||
| Inbuilt Programmer | No | ||||
| 12 | 15 | 18 | 24 | 30 | |
|---|---|---|---|---|---|
| Pre-piping kit | No | ||||
| Stand-off kit | Yes | ||||
| Upward piping kit | No | ||||
| Max horizontal | 9m | 8m | |||
| Max vertical | 7.5m | ||||
| Powered Vertical | 22m | ||||
Also available: High Level Flue Outlet Kit/Direct Rear Flue Kit (55/80)